Search this site
5380 Epoxy
3.2 W/mK — Self-leveling, highly thermally conductive
Designed for potting and bonding applications, 5380 combines high thermal conductivity with electrically insulative properties. Dark gray and self-leveling, this epoxy is ideal for electronics applications that require high heat dissipation.
Uncured
| Work Life | 6 hours @ 25°C |
|---|---|
| Viscosity | 44,000 @ 25°C |
| Shelf Life | 6 months @ -40°C 12 months @ -60°C |
Cure options
2 hours @ 80°C 1 hr @ 120°C
Cured Properties
Based on cure of 2 hours @ 80°C
| Color | Dark Gray |
|---|---|
| Shore D Hardness | D/90/0 |
| Glass Transition Temp (°C) | 20 |
| Density (g/cc) | 3.05 |
| Lap Shear 2024T3 Clad (psi) | 1775 |
| Linear Shrinkage (%) | 0.38 |
| Tensile Strength (psi) | 3670 |
| Tensile Modulus (psi) | 1,990,000 |
| Compressive Strength (psi) | 14,800 |
| Compressive Modulus (psi) | 910,000 |
| Poisson’s Ratio | 0.41 |
| Extractable Ionics, ppm | Chloride: <0.5 Sodium: <0.5 Potassium: <0.3 |
Electrical Properties
Based on cure of 2 hours @ 80°C
| Dielectric Constant | 6.62 @ 1 MHz |
|---|---|
| Dissipation Factor | 0.012 @ 1 MHz |
| Dielectric Strength (volts/mil) | 480 |
| Volume Resistivity (ohm-cm) | 5.3E+14 @ 500 VDC |
Thermal Properties
Based on cure of 2 hours @ 80°C
| CTE below Tg (ppm/°C) | 21 |
|---|---|
| CTE above Tg (ppm/°C) | 48.3 |
| Glass Transition Temp (°C) | 20 |
| Operating Temp. Range (°C) | -100 to 160 |
| Thermal Conductivity (W/mK) | 3.2 |
Outgassing Properties
Based on cure of 2 hours @ 80°C
| TML (%) | 0.68 |
|---|---|
| CVCM (%) | 0.04 |
| WVR (%) | 0.02 |
Acoustic Properties
| Velocity (m/s) | 3,965 |
|---|---|
| Impedance (MRayls) | 12.11 |
| Loss (dB/cm-MHz) | -10.72 |
| Density (g/cc) | 3.05 |
Key Features
- High Thermal Conductivity
- Electrically Insulative
- Meets NASA Outgassing Requirements
- Potting and Bonding Applications
- Injectable
- Long Pot Life
- Self Leveling
- Solvent Resistant
- √ RoHS Compliant
The data contained herein is provided for informational purposes only and are believed to be reliable. APPLI-TEC does not guarantee suitability of this product for any resultant application or freedom from patent infringement. Furthermore, APPLI-TEC disclaims any liability for incidental and consequential damages of any kind including but not limited to lost profits.
New Applications
I want to discuss my application challenges, order samples, or place a first-time order.
Existing Applications
I need to reorder an existing part number, I have a BOM/Spec.